System cannot find the file specified что делать

«The system cannot find the file specified» error message on a Windows Server 2008 R2-based file server if the remote index server has a catalog that has a credential-enabled UNC path

Symptoms

Consider the following scenario:

You enable the Indexing Service role service on two file servers (Server A and Server B) that are running Windows Server 2008 R2.

You create an index catalog on Server A, and then add a UNC path into the index catalog.

You configure the credential that is needed to access the UNC path.

On Server B, you create an IAdminIndexServer object to access Server A. For example, you run the following Microsoft Visual Basic script:set objAdminIS = CreateObject(«Microsoft.ISAdm») objAdminIS.MachineName = «[Server A]» msgbox objAdminIS.MachineName

In this scenario, you receive the following error message:

The system cannot find the file specified

Note This error message indicates that the IAdminIndexServer object cannot access the indexing services on Server A correctly.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a «Hotfix download available» section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The «Hotfix download available» form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows Server 2008 R2 Service Pack 1 (SP1). Additionally, you must install the File Services server role and enable the Indexing Service role service.

For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To apply the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You do not have to restart the computer after you apply this hotfix. To avoid restarting, stop the Indexing Service role service.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows Server 2008 R2 file information notes

The files that apply to a specific product, milestone (RTM, SP n), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

Windows Server 2008 R2

Windows Server 2008 R2

GDR service branches contain only those fixes that are widely released to address widespread, extremely important issues. LDR service branches contain hotfixes in addition to widely released fixes.

The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the «Additional file information for Windows Server 2008 R2» section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

Источник

Top 11 Solutions – The System Cannot Find the File Specified [Partition Manager]

By Bella | Follow | Last Updated December 01, 2021

Summary :

Top 11 effective solutions are listed here to help you fix the system cannot find the file specified error with ease. If you encounter this error while copying files, accessing files, connecting USB drive, you can try using MiniTool software to recover lost data in case of permanent data loss.

Quick Navigation :

Got the system cannot find the file specified error in Windows 10? Here, a true example from forums.ni.com is shown below:

The system cannot find the file specified Run into this error when installing my application on another PC (Win XP). Runs ok on my develop PC (Win7, LabVIEW2013 SP1). Anyone had this error before?

If you encounter the error “The system cannot find the file specified” when installing driver, or doing a system image, or accessing files, or doing other things, don’t worry. Now, you can check this tutorial to find reasons and solutions.

Generally speaking, it is a very common error for Windows users, especially for Windows 10 users, which usually indicates an Error Code 0x80070002. Some common reasons for this error are listed below:

Although the cause is unknown clearly, you can try the following solutions to solve your problem.

How to Fix Error The System Cannot Find the File Specified on Windows 10?

Solution 1. Run Antivirus Software to Scan Your Computer

The virus, cyber threats, and malicious attack are the common causes. It is recommended to run antivirus software to scan your system comprehensively to clean the malicious content and other junk files.

Solution 2. Open the Libraries Folder

According to users, you might be able to fix the system cannot find the file specified error simply by navigating to the Libraries folder which is hidden by default in Windows 10. Do the following to access it:

Open This PC.

Right-click the empty space in the left pane and choose Show libraries.

Now, you will find the Libraries folder in the left pane.

Solution 3. Install Windows Updates

If you haven’t updated Windows for a long time, the system cannot find the file specified error is a sign that you need to install all pending updates. Windows updates often fix both hardware and software errors, therefore we strongly suggest that you install the latest updates by following these steps:

Press Windows key + I.

Select Update & Security > Windows Update.

Click on the Check for Updates button and wait.

Install all the updates.

Restart the system to finish the installation of updates.

Data Recovery after Windows Update

If you find your files are missing after Windows update, try using MiniTool Partition Wizard. The best partition magic software not only can help you maximize disk performance but also can help to recover lost data.

MiniTool Partition Wizard offers Data Recovery feature to help you effectively and quickly recover lost data from damaged, formatted and deleted partition.

Step 1. Launch MiniTool Partition Wizard to get its main interface.

Step 2. Click Data Recovery feature on the top Tool Bar to get the following window.

Step 3. Select the drive/partition containing lost data and then click Scan button.

Step 4. After scanning, save all needed data in a safe place.

Thus, all work has been done! For more information, you can read this post: How to Recover Lost Data from Hard Drives | MiniTool Partition Wizard Tutorial.

Solution 4. Check the System Log Files

Another effective approach to fix the system cannot find the file specified error is to check the system log files.

Navigate to C:/Windows/inf directory.

Open inf folder.

Find file setupapi.dev, and then double-click on it to open the file. (In some cases, the file would be setupapi.dev.log.)

Press Ctrl as well as F at the same time to open Find box.

Type cannot find the file in the search box then start the search to locate the missing file.

Copy and paste it into the Windows/inf folder.

Reinstall the driver.

Solution 5. Change Your Registry

According to users, you can fix this error simply by modifying several registry keys. To modify the registry, do the following:

1.Press Windows key + R.

2.Type regedit, and press Enter.

You can create backup to secure your current registry condition. Click File > Export.

Next, enter the file name for the registry backup and select All under Export range section. Finally, click Save to save the backup. Thus, you can simply run this file to restore your registry to its original state in case anything goes wrong.

3.Navigate to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion.

4.Expand the key and look for RunOnce key. You can create it if this key doesn’t exist. You just need to click the CurrentVersion key and choose New > Key from the menu.

5.Type RunOnce as the name of the new key.

6.Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ key in the left pane.

7.Expand it and check if the RunOnce key has successfully been created. If not, repeat the above steps to recreate it.

8.Close Registry Editor and restart Windows.

9.If you still receive the system cannot find the file specified error after restarting PC, you should keep reading to find other solutions.

If you encounter this error after downloading the driver from manufacturer’s website, try the following steps:

Solution 7. Uninstall and Reinstall the Drivers

If you download the driver from manufacturer’s website and meet this system cannot find the file specified problem, you can try uninstalling and reinstalling the drivers to fix the error.

Go to Control Panel and select Device Manager.

Expand the category and locate the device you wish to uninstall.

Right-click on the device name and choose the Uninstall option from the context menu.

Check the “Delete the driver software for this device” and then click OK button to confirm the action (uninstall).

After uninstalling the driver, install the driver again.

Solution 8. Format Your USB Flash Drive

According to users, you might be able to receive the system cannot find the file specified error while inserting your USB flash drive or other removable hard drives. Now, to fix this issue, you can try formatting your hard drive.

Open This PC, right-click the USB drive and choose Format.

Check Quick Format option when the format window opens.

Click the Start button to start the formatting process.

Sometimes, you will find that Windows was unable to complete this format. Now, if you happen to meet this issue, you can know how to solve it by reading this post How Do I Fix «Windows Was Unable to Complete the Format» Error.

Solution 9. Restore or Repair the Missing Files

As we know, most people encounter the system cannot find the file specified error when trying to access or backup some files stored on the system. This is because that the file is damaged or corrupted. To fix this problem, you need to run chkdsk command to restore or repair the missing files.

Solution 10. Use WinRAR

According to report, some users received this error while deleting a specific file or folder. In this case, you might be able to fix the system cannot find the file specified error by using WinRAR.

Right-click the problematic file, and choose the Add to archive option from the menu.

Check Delete files after archiving and then click the OK button.

Now, you can delete the archive to completely remove the file without any difficulty.

Solution 11. Delete ProfileImagePath Key

While using Windows Backup to create your backup files, you can delete certain values from your registry to fix the system cannot find the file specified error.

Conclusion

Are you still worrying about how to fix the system cannot find the file specified error in Windows 10? Now, try the above methods, you can fix this error easily.

If you happen to know other ways to do this, don’t hesitate to let us know and we promise we’ll update this guide.

ABOUT THE AUTHOR

Position: Columnist

It’s going to be 6 years since Bella came to MiniTool family. She has been writing tech articles for many years. Her special focuses are video editing tips, change video format, data recovery, and manage partitions. She loves to travel and likes to try all new things.

Источник

The system cannot find the file specified error on Windows 10

Computer errors can prevent you from running your favorite applications or from accessing your files.

Speaking of errors, users reported The system cannot find the file specified error on Windows 10.

According to users, they are getting this error while trying to access certain files, so today we’re going to show you how to fix it.

How can I fix The system cannot find the file specified on Windows 10?

Solution 1 – Change your registry

According to users, you can fix this error simply by making few changes to your registry.

Modifying the registry comes with certain risks, therefore we strongly advise that you export your registry and create its backup, just in case. To modify the registry, do the following:

After your PC restarts, The system cannot find the file specified error should be resolved completely.

Once again, we have to mention that modifying the registry can lead to certain issues, so be extra cautious and be sure to create a backup.

Solution 2 – Open the Libraries folder

According to users, you might be able to fix this problem simply by navigating to the Libraries folder.

This folder is hidden by default in Windows 10, and in order to access it, you need to do the following:

Users reported that accessing the Libraries folder fixed the issue for them, so be sure to try this simple solution.

Solution 3 – Install the latest updates

According to users, this was an issue in the past, but you can easily fix it by installing the latest updates.

Windows updates often fix both hardware and software errors, therefore we strongly suggest that you install the latest updates.

Windows 10 usually installs the updates automatically, but you can also check for updates manually by following these steps:

Windows 10 will now check if updates are available. If so, it will download and install the updates automatically.

If you can’t open the Setting app, take a look at this article to solve the issue.

Solution 4 – Format your USB flash drive

Users reported The system cannot find the file specified error while inserting their USB flash drive. This issue can also appear with any removable storage, and in order to fix it, you need to format your drive.

To do that, follow these steps:

By disabling the Quick Format option all your files will be completely removed and unrecoverable.

Some users are also suggesting to use ImageUSB software.

This software will format your drive and fill it with zeroes thus fixing this problem. Keep in mind that this process can take a while, so you’ll have to be patient.

If you encounter the Windows cannot format this drive error, follow the quick steps from this guide to solve the issue.

Solution 5 – Use chkdsk

If you’re getting The system cannot find the file specified error, that might be because the file is damaged or corrupted. To fix this problem, you need to run chkdsk command and scan your files.

This is relatively simple, and you can do it by following these steps:

Solution 6 – Use WinRAR

According to users, The system cannot find the file specified error appears when trying to delete a specific file or folder.

If that’s the case, you might be able to fix the problem by using WinRAR. To fix the problem, do the following:

Your file will be moved to the archive and the original will be deleted from the hard drive. Now you can just delete the archive to completely remove the file.

Solution 7 – Delete ProfileImagePath key

The system cannot find the file specified error can occur while using Windows Backup, and it will prevent you from creating your backup.

According to users, you might be able to fix this problem by deleting certain values from your registry.

Changing the registry can lead to stability issues, so before you make these changes, we strongly advise you to back up your registry and create a System Restore point.

To delete this key from the registry, do the following:

After deleting the problematic profile, close Registry Editor and check if the issue is resolved.

As we already mentioned, modifying the registry can lead to certain issues, therefore we strongly recommend that you create a backup before making any changes.

Solution 8 – Enable Automount

If this problem appears while using Windows Backup, you can fix it by using diskpart and automount commands.

Diskpart is a powerful tool for hard drive management, so be extra cautious while using it.

By using this tool you can cause damage to your system, so keep in mind that you’re using this tool at your own risk. To run diskpart on Windows 10, follow these steps:

If the issue still persists, you need to do the following:

After your PC restarts, check if the issue is resolved. Once again, diskpart is powerful tool, and if you’re not careful you can delete files or make your system unbootable, so be extra cautious with it.

Solution 9 – Check if your system partition is active

The system cannot find the file specified error can occur while using Windows Backup. To fix the issue, you need to check if your system partition is set to active. To do that, follow these simple steps:

Solution 10 – Change shadowcopy storage area

If The system cannot find the file specified error appears on your PC, you can fix it by changing the shadowcopy storage area size.

This can be a risky procedure, so we advise you to create a backup just in case.

To change shadowcopy storage area, you need to do the following:

If the issue still persists, open Command Prompt again and enter vssadmin delete shadows /all command.

Solution 11 – Add a printer manually

Few users reported that this issue occurs while trying to add a printer. If you have the same problem, you might want to try adding the printer manually.

This is a simple procedure, and you can do it by following these steps:

According to users, this error occurs while installing HP printers, but if you have this problem with any other printer, be sure to try this solution.

Solution 12 – Copy the files manually

Apparently this error can occur while trying to install certain devices, and users reported The system cannot find the file specified error while installing an Epson scanner.

Few users were able to solve this issue simply by finding the missing file in Windows folder and copying it to the appropriate location.

According to users, they fixed the problem with their device by finding the usbscan.sys file in Windows folder and copying it to Windowsinfsetupapi.dev folder.

This solution only works for particular devices, and you’ll mostly need to transfer a different file on your PC.

We have to warn you that making changes in Windows folder can be dangerous, so be sure to create a backup if you plan to make changes to Windows directory.

Solution 13 – Uninstall all HP applications

According to users, this error appears while installing a printer driver on some HP laptops.

If you’re getting The system cannot find the file specified error, you might be able to fix it by uninstalling all HP applications. To do that, follow these steps:

Few users reported the same problem, and according to them, the error is caused by McAfee antivirus. To fix the issue, you need to disable McAfee by following these steps:

Solution 14 – Change the drive letter for System Reserved partition

The system cannot find the file specified error can appear while trying to use Windows Backup. If that’s the case, you might be able to fix the problem by revealing System Reserved partition.

We have to mention that changing System Reserved partition settings can lead to certain issues, so keep in mind that this procedure isn’t risk-free. To make the necessary changes, follow these steps:

Close Disk Management and check if the issue is resolved. We have to mention that System Reserved partition will remain visible, so don’t make any changes to it.

This isn’t the best solution, but it’s a solid workaround that might work for some users.

Solution 15 – Delete the Config value from the registry

According to users, The system cannot find the file specified error can appear while trying to reinstall network driver. If that’s the case, you need to open Registry Editor and delete a single value from it.

Before making any changes, we advise you to check Solution 1 to see how to back up your registry. To remove the problematic key, do the following:

Solution 16 – Use download manager

Few users reported that this problem appears while trying to install downloaded applications.

If you’re getting The system cannot find the file specified error while trying to install certain application, you might want to redownload the setup file.

Users reported that using a download manager such as Internet Download Manager fixed the issue for them so we advise you to try that.

Sometimes your download can become damaged or corrupted, so be sure to try using a download manager.

Solution 17 – Check if necessary services are running

This error can appear with almost any software, and users reported The system cannot find the file specified error while using VMware.

To fix the problem, you need to start appropriate VMware services, and you can do that by following these steps:

Another way to start VMware services is to use Command Prompt. This method is faster, and you can perform it by following these steps:

If the issue still persists, you might have to completely reinstall VMware and check if that solves the problem.

Solution 18 – Check if your USB port is powered

Apparently this issue appears while using Windows Backup feature. To fix The system cannot find the file specified error, it’s advised to connect any external hard drives to powered USB ports.

Few users reported that you can fix the issue simply by connecting an external hard drive to a different port.

It seems that Windows Backup feature requires external storage to be connected to a powered USB port.

Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

After connecting the device to a different USB port, check if the issue is resolved.

Solution 19 – Remove Windows.old folder

According to users, The system cannot find the file specified error can appear due to Windows.old folder.

Windows.old folder appears if you upgrade your Windows or if you perform a clean install of Windows 10.

This folder holds your previous Windows installation, and it allows you to restore it.

Windows.old folder can cause this error to appear while using Windows Backup feature, and to fix the problem, you need to remove Windows.old folder.

This is relatively simple, and you can do it by following these steps:

After removing Windows.old folder from your PC, check if the problem is resolved.

If you need more info on how to delete the Windows.old folder on Windows 10, check out this dedicated guide.

Solution 20 – Restart Windows Backup service

If you’re getting The system cannot find the file specified error message while trying to run Windows Backup, we recommend that you restart Windows Backup service. To do that, follow these steps:

Some users are also recommending to remove Samsung Magician software from your PC. +If you have this software installed, remove it and check if that solves the issue.

How can I fix The system cannot find the file specified error?

Solution 1 – Move the problematic file

According to some users, you might be able to fix this problem simply by moving the problematic file to a different folder.

Users reported that moving the problematic file to the root folder, such as C: for example, fixed the issue for them. This is a simple workaround, but it might fix the issue for you, so feel free to try it out.

Solution 2 – Remove problematic software

Some users reported that The system cannot find the file specified error appears every time they start their PC. This can be quite annoying, and according to users, you can fix this problem simply by removing the problematic applications.

It seems that this problem is caused by Apple software, Real Player and Spybot Search & Destroy. If you have any of these programs installed, we advise you to remove them in order to fix this problem. To do that, you need to follow these steps:

After uninstalling the problematic applications, you can run CCleaner and use it to remove any remaining files related to these apps. Lastly, restart your PC and check if the error message appears again.

Solution 3 – Use bcdedit command properly

Several users reported The system cannot find the file specified error message while trying to run bcdedit command in Command Prompt. This usually occurs if you’re not starting this command properly. To fix the issue, you need to do the following:

Solution 4 – Show file extensions

Sometimes you might get The system cannot find the file specified error message in Command Prompt if you don’t know the file’s exact extension.

By default, Windows 10 hides file extensions from the user, and this can sometimes lead to certain problems. For example, let’s assume that you have a file called file.txt.

This might look like a normal text file, but let’s see what happens if we enable file extensions for files. To do that, simply click the View tab and check File name extensions.

Now let’s see how our file.txt looks like. After revealing the file extensions, the full name of the file is file.txt.txt.

If you try to access file.txt.txt instead of file.txt in Command Prompt, you’ll see that it works without any issues. There’s also another way to check the file extension of your files in Command Prompt.

Simply navigate to the desired folder in Command Prompt and enter dir command.

List of all directories and files in that folder will now appear. As you can see, you can now easily find the full name and extension of any file in that directory.

This isn’t an error, and it’s more of a beginner’s mistake. In the future, before trying to access a certain file, be sure to check for its full name by using the dir command or by revealing file extensions.

How can I fix The system cannot find the file specified error in uTorrent?

Solution 1 – Delete the problematic torrent

If you’re getting The system cannot find the file specified error while using uTorrent, you might be able to temporary fix it by using this solution. To fix the problem, follow these simple steps:

Keep in mind that this is just a temporary workaround, so it’s quite possible that the same error message will appear again.

We also have to warn you that this method will completely delete the torrent and all associated files from your PC.

If you’re getting the System cannot find path uTorrent error in Windows 10, follow this article to solve the problem.

Solution 2 – Check the torrent’s download folder

Sometimes The system cannot find the file specified error occurs if your download folder path isn’t correct. To fix this issue, be sure to manually select the download folder for each torrent.

To do that, follow these steps:

Alternatively, you can set a default download folder for all torrents by doing the following:

After doing that, the error message should be completely resolved.

Solution 3 – Perform a Disk Cleanup

According to users, you can fix The system cannot find the file specified in uTorrent simply by performing a Disk Cleanup.

Sometimes temporary files or old Windows installations can interfere with uTorrent and cause this error to appear.

Several users reported that Disk Cleanup fixed their problem, so we suggest that you try it out.

Regarding Disk Cleanup, we already explained how to perform it in one of our previous solutions, so be sure to check it out.

While performing Disk Cleanup be sure to select all available options in order to remove all unnecessary and old files.

Solution 4 – Delete uTorrent installation manually

Sometimes The system cannot find the file specified error can appear if your uTorrent installation is corrupted.

According to users, uTorrent isn’t available on the list of installed applications, and it starts on its own.

If you have the same problem, and you can’t remove uTorrent, you need to follow these steps:

How can I fix The system cannot find the file specified?

Solution 1 – Use Chromebook Recovery utility

According to users, this error can appear while trying to format specific USB flash drives.

It seems that The system cannot find the file specified affects USB flash drives that are used as Chromebook recovery image holders.

In order to fix the problem, users are suggesting to use Chromebook Recovery utility to erase the USB drive.

After doing that, the flash drive will start working in Windows 10, and the error will be resolved. To fix the problem, follow these steps:

After doing that, you’ll be able to format the flash drive once again from your operating system. Keep in mind that this solution only works with USB drives that are used as recovery media for Chromebook.

Solution 2 – Use clean command in diskpart tool

If you’re having The system cannot find the file specified error while using your USB flash drive, you might need to use diskpart to fix it.

This process will remove all files from your flash drive, so create a backup if you need to.

To clean the USB flash drive, do the following:

Now your USB flash drive is clean from any files, and in order to use it, you need to format it. To do that, follow these steps:

As you can see, this process is relatively simple, but you need to be extra cautious while using diskpart tool.

Solution 3 – Make changes to your registry

The system cannot find the file specified error appears for some users while inserting a USB flash drive to their PC. To fix this problem, you need to make some changes to your registry.

Before making any changes, we advise you to create a backup of the registry, just in case.

In some rare cases %SystemRoot% variable might not work properly, and that will cause this error to appear.

After making the necessary changes and replacing the value with the absolute path, the issue should be resolved.

Solution 4 – Format the drive on Mac or Linux

If you can’t access your flash drive on Windows due to The system cannot find the file specified error, you might need to format it on Mac or Linux first.

According to users, they solved the issue simply by connecting their flash drive to any Mac or Linux computer and formatting the drive using FAT32 file system.

After formatting the drive, connect it to your Windows 10 PC and follow the Solution 2 to clean the drive using diskpart tool.

Solution 5 – Disable automount

In one of our previous solutions we mentioned how enabling the automount feature can fix The system cannot find the file specified when inserting a USB flash drive.

However, it seems that in some cases you can fix this error by disabling automount in diskpart. To do that, you need to follow these steps:

After disabling automount, you should be able to format your removable storage without any errors. After you’re done, you might want to enable the automount feature.

To see how to do that, check out one of our previous solutions.

Solution 6 – Delete and format all partitions

This solution will delete all files from your hard drive, so if you’re going to use it, be sure to back up all your important files.

Since this solution will delete all files, we suggest that you use it only with a new PC that doesn’t have any important files stored on it.

Users reported that after reinstalling their operating system they are unable to initialize their additional hard drive.

According to them, they are unable to initialize it due to The system cannot find the file specified error message.

If you have this or any other similar issue, you can fix it by using Partition Wizard software.

Simply create a bootable flash drive with this tool and start your PC from it. After the tool starts, you need to delete all your partitions on the drive that you can’t initialize and format them again.

After that, initialize partitions as GPT.

If you want to convert MBR to GPT disk without data loss, check out this awesome guide.

Once again, this solution will delete all files from the problematic drive, so be sure to use this solution as a last resort or only with a new PC or an empty hard drive.

The system cannot find the file specified error can affect your PC in many different ways. This can be an annoying error, but we hope that you solved it by using one of our solutions.

If you have any other questions, feel free to leave them in the comments section below and we’ll surely check them out.

Источник